RD-600 displays "16F" and won't reset or operate in manual mode.
The panel (faceplate module) needs repair or replacement. Take it to an irrigation supply store - they can bench-test and either fix the circuit board or sell a replacement panel (~$100-120).
On Rain Dial controllers, alphanumeric codes often indicate station faults. "16F" could mean Station 16 Fault (on a 12-station controller, this suggests internal logic error) or a firmware glitch. The reset clears most logic errors; persistent codes indicate hardware failure.
Irritrol Rain Dial 900: Split Front/Back Yard onto Programs A and B
KwikDial KD12 No Display: Reset Contacts or Replace Controller
Irritrol Rain Dial RD-600 Battery Drain and Unstable Station Voltage
Hardie Rain Dial 1993: Zones 6 & 7 Run Together—Crossed Wire or Controller
Hydro Rain HR6100 Shows Gibberish Codes – Controller Failed
Rain Dial 670301 Malfunctions – Replace Panel with Irritrol Rain Dial 6
Rain Dial RD-600 Programming: Separate Schedules for Bushes (A) and Trees (B)
Rain Bird RC-7A Not Watering: Controller vs. Valve Diagnosis
Rain Bird SST-440i Display Dead But Zones Run: Controller Failure
Irritrol RD‑600‑EXT Display Frozen at 7:00 AM – Microprocessor Issue
Hardie Rain Dial 9‑Station Display Reverts to PM – Microprocessor Failing
Rain Dial RD-600 Flashing Display After Year of Non-Use
Hardie Rain Dial Restarts Zone 1 After Cycle: Valve 1 Stuck Open
Irritrol Rain Dial Runs Program A Twice—Extra Start Time Programmed
Copyright © www.100flowers.win Botanic Garden All Rights Reserved