Hardie Rain Dial Restarts Zone 1 After Cycle: Valve 1 Stuck Open

If your Hardie Rain Dial finishes its cycle then restarts zone 1 and won't stop (even in OFF), valve 1 is stuck open — not the controller.

Common Causes

See irrigationtutorials.com for valve rebuild guide. Shut off main water first.

Irrigation: Hardie Rain Dial 9‑Station Display Reverts to PM – Microprocessor Failing; Rain Dial Programming: Time/Day Setting Switch Position; Hardie Rain Dial 1993: Zones 6 & 7 Run Together—Crossed Wire or Controller; Rain Dial Programmed But Won't Water: Check for Short or Bad Processor; Rain Dial 670301 Malfunctions – Replace Panel with Irritrol Rain Dial 6; Hardie Rain Dial Won't Activate Sprinklers After Rain Shutdown; Programming Hardie Rain Dial for Weekly Watering Schedule; Lost Key for James Hardie Controller: Don't Break In, Buy a Key; Fixing a Hardie Rain Dial RD600 That Runs 7 Days a Week Instead of 3; Programming a Hardie Rain Dial: Using A, B, C Programs for Different Schedules

Garden Articles

Plants