Botanic Garden >> Gardening > >> Question and Answer >> Irrigation

Zone 1 Valve Won't Run Auto – Valve Backwards or Defective

New valve, new solenoid, new wire, swapped controller terminal—works on terminal 2, not 1. Controller OK.

Two Causes

Valve installed backward—check flow arrow.
New valve defective.

Verify arrow points from supply to heads.

Irrigation: Toro GreenKeeper 212 Buttons Unresponsive – Power Cycle With Battery Out; Troubleshooting a Richdel Front Drip Zone That Clicks But Won't Activate; Hardie Irrigation System Runs Continuously: Valve vs Controller Diagnosis; Toro Zone 1 Stays On All Cycle—Controller or Diaphragm; Diagnosing an 18-Year-Old Hardie Controller with SC Error Codes; Orbit Valve Flutters and Won't Open Fully; New Controller Installed, But System Still Won't Run from Timer; Clicking Irrigation Valves: Solenoids Click but Don't Open; Rain Dial RD-600 Timer Flashes and Pump Surges Briefly Then Stops; Valve Won't Open Electrically: Stem Adjustment or Diaphragm

Garden Articles

Hunter ICC All Zones Come On Together: Controller or Wiring Crossed

Hunter Pro-C Master Valve Not Activating for Stations 1-3

Nelson SmartZone EZ: Zone 2 Won’t Shut Off – Pump Relay or Controller Fault

Irritrol RD-600 Only Outputs 15VAC: Controller or Wiring Fault?

Hunter X-Core: System Won't Activate, Water Pressure Present But No Flow

Rain Bird ESP-8Si: PR OFF Fixed, But System Still Won't Run - Check Master Valve

Hardie Controller: Pump Won't Start — Test Controller, Relay, Wire, Pump

Plants

Irritrol 1200: Manual Start Not Working Despite Display Functioning

Hunter XC Station 1 Won't Activate from Controller—Valve Works Manually

Toro Vision II Zone 6 Inactive: Locate Valve and Replace Solenoid

Rain Bird ESP-4TM Dead After Winter: Check Valve Bleed & Main Valves

Sprinkler System Won't Shut Off: Valve or Controller Fault?

All Stations Dead After Head Replacement: Check for Cut Wire

Toro Zone Valve Won't Shut Off Automatically

Copyright © www.100flowers.win Botanic Garden All Rights Reserved