Hunter X-Core Repeats Run Cycle? Check for Hidden Start Times

If your Hunter X-Core 6-station controller repeats the watering cycle 30 minutes after completion, you likely have multiple start times programmed in one or more programs.

How Start Times Work

Each program needs only one start time. If you set start times at 6:00 AM and 6:30 AM, the program runs twice — the second start triggers a new cycle before the first finishes.

Fix

1. Turn dial to Start Times.
2. Cycle through Programs A, B, C.
3. For each program, ensure only one start time is set (others = OFF).

If Only One Start Time Exists

The controller may be defective. Hunter X-Core carries a 5-year warranty. Contact Hunter Industries for replacement — they'll guide you through the RMA process.

Pro Tip

Label your controller with a note: "ONE START TIME PER PROGRAM" to prevent future errors.