Toro DDC Runs at 1 AM and 6 AM: Extra Start Time in Program A, B, or C

Programmed for 6 AM Sun/Wed/Fri, But Also Runs at 1 AM

Check all three start time slots in Program A. If Start Time #2 or #3 is set (e.g., 1 AM), clear them.

Any start times there will trigger runs. Clear all times in B and C if unused.

Irrigation: Toro TCM 212 Losing Time: Microprocessor Failure Means Replacement; Toro TMC-212 Starts Unexpectedly at Midnight: Check Extra Start Times; Toro Vision II Plus Runs Every Cycle Twice: Seasonal Adjust or Extra Start Time; Toro Vision II Runs Extra Cycle: Check Start Times and Seasonal Adjust; Toro TMC‑212 Starts at Random Times – Processor Damage from Surge; Hunter X-Core Repeats Run Cycle? Check for Hidden Start Times; Hunter Controller Zone Running Too Long: Programming Error or Hardware Failure?; Hunter Pro-C Multiple Start Times Causing Repeated Cycles: How to Clear Extra Start Times; Setting Different Run Times for Multiple Start Times on Hardie Touch Command XL; Sprinkler System Runs Multiple Cycles: Check Start Times

Garden Articles

Plants