Hunter SRC Controller Only Works After Noon: Microprocessor or Temperature Sensitivity?

Hunter SRC Won't Activate Before Noon; Manual Works in Afternoon

No field‑wiring or valve issue would be time‑dependent. The controller’s microprocessor likely has a thermal or timing fault.

Take the controller to an irrigation supply store for a bench test.

Irrigation: Hunter SRC-600i No Auto or Manual Run: Likely Controller Failure; Rain Bird ESP-8Si: PR OFF Fixed, But System Still Won't Run - Check Master Valve; Hunter SRC Controller No Power – Replace with Rain Bird or Irritrol; Hunter Pro-C: Zone Runs Manually But Not Automatically; Index Valve (K-Rain/Fimco) Clogged—Sprinkler Heads Won't Pop Up; Hunter XC Controller Failure: Solenoid Click but No Water—Test with 9V Batteries; All Stations Dead After Head Replacement: Check for Cut Wire; Hunter System Not Working: Valve Boxes Flooded After Storm; Cleaning Hunter Valves: Step-by-Step Field Procedure; Rain Dial System Won't Start: Check Common Wire

Garden Articles

Plants