Question
Josh,
I have a Hunter SRV that is stuck in the closed position.  I have checked the solenoid by putting it on an adjacent SRV and it is working both electrically and manually. Do you have any suggestions?
Brad

Answer
IF IT IS A MODEL WITH FLOW CONTROL (DIAL IN THE CENTER) MAKE SURE IT IS ALL THE WAY OPEN. DISASSEMBLE THE VALVE TO CHECK FOR DEBRIS INSIDE THAT MAY BE CLOGGING THE PORTS - MAKE SURE TO REPLACE EVERYTHING EXACTLY AS IT WAS REMOVED. A PAPERCLIP IS HELPFUL IN CLEANING THE PORTS. BE SURE TO TURN OFF THE MAIN WATER SUPPLY BEFORE TAKING THE VALVE APART.