Setting Different Run Times for Multiple Start Times on Hardie Touch Command XL

The Hardie Touch Command XL controller uses separate programs (A, B, C, etc.) to assign different run times to the same station at different start times. You cannot set multiple run times within a single program.

Solution: Use Two Programs

1. Program A: Set start time 1 for 4:00 AM. Set station run time to 50 minutes.
2. Program C: Set start time 1 for 3:00 PM. Set the same station run time to 20 minutes.

Each program runs independently. Program A waters for 50 minutes at 4:00 AM; Program C waters for 20 minutes at 3:00 PM.

Need the Manual?

Download a free manual at www.coastwaterworks.com for detailed programming steps.