James Hardie Touch Command LX II Lost Stations After Power Outage

Touch Command LX II now sees only 8 of 19 stations after power loss. Likely memory corruption or blown fuse.

Touch Command Manual for station configuration steps.

If reset fails, controller memory chip may be damaged. Replacement panel or full unit needed.

Irrigation: Hardie RD-600 Display Frozen After Power Outage: Controller Failure; Hardie Controller Manual Station Error: Replace Panel or Upgrade to Rain Dial; Hardie 446PR Display Garbled: Reset or Replace; Rain Bird ESP-6TM Dead After Wrong Fuse Installation: Controller or Transformer?; Hardie RD-600 Shows "75", Zone 1 Runs Forever – Replace Controller; Adding Stations to a James Hardie (Irritrol) Controller: Understanding Station Limits; Programming Hardie Rain Dial for Weekly Watering Schedule; Hardie Controller Runs Continuously: Valve or Controller Fault?; Hardie RD-1200 Blank LCD: Troubleshooting Power & Display Issues; James Hardie Controller (c. 1993): MV Terminal & Pump Start Issues

Garden Articles

Plants