After 6 years, the SRC Plus operates only with excessive button pressing—classic microprocessor or keypad membrane failure. The controller is not worth repairing.
Both use standard 24 VAC valve wiring. Label existing wires (1–5, C, MV/Pump), disconnect old, connect new. 30-minute job.
Avoid Hunter replacements if you've had repeated issues; the Rain Dial and ESP platforms have superior long-term reliability records.
Hunter Pro‑C Runs at Unscheduled Times – Clear Programs B and C
Recurring Hunter XC Controller Failures: Wiring Short or Solenoid Issue?
Hunter XC Controller No Display After Power Outage: Reset and Power Checks
Hunter Control Won't Start Well Pump – Check Pump Start Relay Circuit
Troubleshooting Hunter Pro-C Module Failures After a Storm
Hunter ICC "NO AC" With Good Transformer Voltage: Board Failure
Hunter XC Controller Stuck on Wrong Time – Reset Procedure
Troubleshooting Hunter EC-400 Controller Time Setting Issues
Hunter Controller “ERR” on All Stations – Pump/Master Valve Short
Hunter Pro-C Tripping Breaker: Reset First, Then Replace If Needed
Diagnosing Pulsing Zone on Hunter Pro-C Controller
How to Reset and Reprogram a Hunter EC Controller After a Power Outage
Hunter Pro-C Module Recognition Issue: Secure Expansion Modules Properly
Copyright © www.100flowers.win Botanic Garden All Rights Reserved