A homeowner with a Hunter SRC controller finds the year setting only goes up to 2011 (starts at 1996). Setting Dec 31, 2011 doesn't roll over to 2012. The controller came with the house; age unknown.
Hunter confirmed the original SRC controller (circa 1996) was not designed to handle years beyond 2011. This is a firmware/hardware limitation, not a malfunction. The calendar chip or programming only supports 1996-2011.
The year 2001 has identical calendar alignment to 2012 (both start on Saturday, non-leap years). Setting the controller to 2001 with correct month/day will produce correct watering schedules for 2012.
Hunter Help Line: 1-800-733-2823 for official confirmation and current product recommendations.
Hunter Pro-C Programming: Start Times Are for Programs, Not Individual Stations
Hunter ICC All Zones Come On Together: Controller or Wiring Crossed
Irritrol RD-600 Only Outputs 15VAC: Controller or Wiring Fault?
Hunter EC Controller Stations 1&2 Not Working: Power Surge Damage
Hunter EC "NO AC" After Thunderstorm: Surge Damage Likely
Hunter System Not Working: Valve Boxes Flooded After Storm
Toro vs. Hunter Irrigation: Brand Comparison for Minnesota Installation
Water Hammer on 20‑Head Zone – Adjust Flow Control Before Replacing Valve
Florida Drought Restrictions vs. Texas – Irrigation Contractor Perspective
Connecting Toro 53770 Wireless Sensor to Toro Greenkeeper 212
Hunter EC Controller – Accessing Wiring Compartment
Hunter SRC Controller Year 2012 Not Available: Design Limitation
Hunter Controller Shows Running but No Water: Diagnostic Questions
Copyright © www.100flowers.win Botanic Garden All Rights Reserved