The system runs the correct zones for 10 minutes each but repeats the cycle every hour.
Extra start times are programmed (start times 2 and/or 3) or programs B/C have start times set.
If still faulty, the panel can be repaired or replaced at Sprinkler World of Arizona.
Nelson EZ Pro 8300 Repeats Program After Lightning: Check Seasonal Adjust, Start Times, Programs
Why Toro ECX Controller Only Programs Zones 1‑4 and Ignores 5‑6
Hunter Controller Multiple Programs Running Simultaneously
Imperial Valet 24-Hour Dial Motor Failure—Motor Replacement
Pump Cycling: Check Controller Output to Pump Relay
Hunter EC Controller Programming Confusion: Programs vs. Stations
Hunter Pro-C: Zones 5–10 Not Recognized in Start Times – Reset and Check Wiring
Hydro Rain HR6100 Shows Gibberish Codes – Controller Failed
Understanding Hunter Pro-C Start Times vs. Station Run Times
Rain Dial RD-600 Programming: Separate Schedules for Bushes (A) and Trees (B)
Hunter Sprinkler Zones Cycling On/Off: Cycle-Soak or Valve Fault?
Rain Dial RD-600 Only Runs First Zone: Program A vs. B/C Confusion
Copyright © www.100flowers.win Botanic Garden All Rights Reserved