To run all zones normally but only drip (valve 1) after rain — you can't just switch programs. Both A & B run if both have start times.
Remove start time from Program A when you want only drip. No way to run B only while A has a start time.
Alternative: Use seasonal adjust or rain delay, but manual start time removal is simplest.
Designing a 1-Acre Irrigation System from a Point Well: Mainline Layout and Wiring
Rain Bird ESP "SKIP" on Zones 8–10: Need Controller Model to Diagnose
Hydro Rain 100C Works Manual But Not Auto: Check Rain Delay, Reset, Power Cycle
Rain Bird ESP-6SI Auto Program Skips Stations 4 and 5: Verify Programming Steps
Rain Bird RC-7A Station Wheel Stopped: Motor or Switch Failed
Rain Bird ESP-6 Shows "8888": Controller Likely Dead, Replace with ESP-Modular
Rain Bird RC‑7BI: Manual Zone Advance Works but Auto Start Fails
Rain Bird ESP‑6: No 110 V Power at Controller – Transformer or Wiring Issue?
Rain Bird ESP-TM Clock Display Shows Only Hours, Resets to Zero
Rain Bird ESP‑8SI “PR OFF” Error – Power Supply Check
Replacing Rain Bird RC-1260Bi Mechanical Controller with Digital Model
Hunter X-Core Repeats Run Cycle? Check for Hidden Start Times
Copyright © www.100flowers.win Botanic Garden All Rights Reserved