The user is confused why zones have different run times on Program A versus Program B on a Rain Bird controller.
Most controllers allow multiple independent programs (A, B, C). Each program can have its own start times, days, and zone run times. Zones always run in numerical order within a program; you cannot reorder them (e.g., zone 5 before zone 8).
If multiple programs are unwanted, go to Program B, set all zone times to zero, then enter the desired times in Program A. All zones will run sequentially in a single program.
New Rain Bird System Shows "5 NOMOD": Module Not Seated
Rain Bird RC-7Bi with K-Rain Indexing Valve: Zones Change on Manual Advance
Mystery Middle Valve: Leaking, No Visible Output - What Is It For?
Rain Bird PC-106PS: Dog Chewed Wires, Need Reconnection Guide
DIY Rain Bird ESP-6TM to SST-600i Controller Replacement
Rain Bird ESP Modular Rain Sensor Won’t Reset – Moisture Still Present
Rain Bird ESP-1 Troubleshooting: Need System History
Rain Bird RC-7A Hangs Between Stations: Advance Motor or Gear Wear
Rain Bird ESP 14-Year-Old Blowing Fuses—Controller vs. Field Isolation
Rain Bird ESP-6SI Stuck on Station 1: Programming or Electrical Fault?
Replacing a Discontinued Rain Bird RC-7Bi Clock Module After Lightning Damage
Copyright © www.100flowers.win Botanic Garden All Rights Reserved