Nelson EZ Pro 8300 Repeats Program After Lightning: Check Seasonal Adjust, Start Times, Programs

Post-Lightning Behavior: Program Repeats Continuously

Transformer and auto-resettable fuse replaced. System runs but loops program.

Seasonal Adjust: Set to 100%. If >100%, controller splits run time into two cycles.
Start Times: Only Start Time #1 should be set; #2, #3 must be OFF.
Programs B & C: Must have no run times programmed (all OFF).

Lightning likely damaged the microprocessor. Replace controller (Irritrol Rain Dial or Rain Bird ESP).

Irrigation: Nelson EZ Pro 8300 Repeats Program After Lightning: Check Seasonal Adjust, Start Times, Programs; Rain Bird RC-7Bi Stuck on Zone 1: Advance Motor or Switch Failure; Irritrol RD‑900: Programs B and C Won’t Run Automatically; Hunter EC‑400 Won’t Show PM – Reset Procedure; Rain Bird Time Clock Runs Continuously: Eliminate Stacked Start Times Across Programs; Hardie Total Control Won't Stop Cycling: Multiple Start Times Issue; Hunter EC Controller Programming Confusion: Programs vs. Stations; Nelson Valve Won't Shut Off: Clicking Noise After Top Replacement; Rain Dial RD-600 Only Runs First Zone: Program A vs. B/C Confusion; Rabbit Nesting in Yard: Fence, Don't Trap

Garden Articles

Plants