New Drip Zone Valve Stuck On: Debris from Installation

Toro Vision 1: New Zone Valve Won't Shut Off After Adjustment

Added drip zone, adjusted flow, now valve stuck open. Other 4 zones fine. Moving wire to another terminal didn't help.

New valve = fresh PVC shavings, Teflon tape, dirt. Debris holds diaphragm open.

1. Shut off water. 2. Open valve top, remove diaphragm. 3. Flush valve body thoroughly. 4. Reinstall (new diaphragm if nicked).

Reply with model # for specific disassembly tips.

Irrigation: Nelson Controller: Zone 2 Runs With Every Other Zone — Wiring or Valve Issue?; Zone 3 Runs With All Others: Wiring Cross or Pump Start Wire Fault; One Zone Feeding a Second Manifold – Master Valve Wiring; Leaking Sprinkler Heads: Valve Diaphragm or Low-Head Drainage?; Rain Bird ESP-LX Running All Zones Simultaneously: Programming and Valve Fixes; New Home Sprinkler Issue: Zone 1 Runs Continuously With All Zones; One Sprinkler Zone Runs With All Others: Master Valve or Wiring Fault?; One Zone Low Pressure, Pump Cycles – Valve Not Opening Fully; All Valves Buzz, No Water to Heads: Supply or Adjustment Issue; Random Zone-Change Water Hammer in 5-Zone System

Garden Articles

Plants