L-shaped yard, 22,000 SF, 1" PVC from well. Need pump sizing for 30/40/50 PSI.
12–18 GPM at 40 PSI is the sweet spot for cost/efficiency. 40 PSI is standard pump rating point.
Reply with well size, depth to water, and driller's yield. I'll recommend specific pump models (Goulds, Sta-Rite, Berkeley).
Well Water Irrigation – Valve Stuck Open from Debris
Troubleshooting Low Water Pressure in Two Irrigation Stations
Pump Pressure Declines During Operation: Foot Valve or Water Table
Draining Groundwater Under a Pool with a Sump System
Using Sump Pump Groundwater for Irrigation: Storage and Drip Only
Shallow Well Yield Insufficient for Lawn Irrigation
Caring for a Miniature Tree Rose: Potting, Pruning, and Watering by Weight
Florida Drought Restrictions vs. Texas – Irrigation Contractor Perspective
Flotec 3/4 HP Pump Pressure Loss: Diagnose Pump vs. Well Supply
Well Pump Low Pressure: Check Recovery, Obstruction, Foot Valve
Planning an Irrigation Well in Central Florida: Key Questions
Irrigation Pump with Well-Mate Bladder Tank: No Pressure After Winter
Well Pump Short Cycling: Causes and Solutions
New Home Irrigation System: No Water After Valve Replacement
Copyright © www.100flowers.win Botanic Garden All Rights Reserved