1. Home
  2. Question and Answer
  3. Houseplants
  4. Garden Articles
  5. Most Popular Plants
  6. Plant Nutrition

Hunter EC Controller Won't Reset After Power Outage: Master Reset Procedure

Hunter EC Dead After Power Outage: Try Master Reset

Power outage may have included surge that damaged microprocessor.

Master Reset (Page 13 of Manual)

    1. Remove battery. 2. Unplug transformer / turn off breaker. 3. Hold down minus (-) and plus (+) buttons simultaneously. 4. Reapply power while holding buttons. 5. Display should flash "RESET" or similar. 6. Release buttons, reprogram.

Manual Link

Hunter EC Owner's Manual

If Reset Fails

Surge likely toasted the board. Replace with Hunter Pro-C or HC (WiFi).

Copyright © www.100flowers.win Botanic Garden All Rights Reserved