Botanic Garden >> Gardening > >> Question and Answer >> Irrigation

Hunter XC Controller Stuck on “OFF” – Rain Sensor Bypass

Hunter XC Shows “OFF” After Power Outage

After a rain‑induced power outage, a Hunter XC controller reads “OFF” constantly and won’t operate. Manual doesn’t address this.

Quick Fix

Page 13 of the manual: “OFF” means the rain sensor is shutting the system off. Switch the controller to “Bypass” mode to override the sensor and restore operation.

Irrigation: Nelson Controller: Zone 2 Runs With Every Other Zone — Wiring or Valve Issue?; Zone 3 Runs With All Others: Wiring Cross or Pump Start Wire Fault; Toro ECxTra "Watering Off" Symbol Stuck On—Rain Delay Activated; One Sprinkler Zone Runs With All Others: Master Valve or Wiring Fault?; Rain Bird EC Controller Zone 8 Blanks Screen: Troubleshooting Steps; Zones Come On Together – Short in Controller or Field Wires; All Sprinkler Zones Run Simultaneously: Controller or Valve Fault?; Sprinkler System Trips GFCI After 5 Minutes: Electrical Troubleshooting; Hunter ICC Runs With Controller Unplugged: Failure Analysis; Toro Vision 1: All 7 Zones On Simultaneously—Controller Failure

Garden Articles

Rain Bird ESP-LX "Fault 4" Code: Zone Skipped

Hunter EC Shows OFF After Power Outage: Disable Rain Off or Reset

Rain Bird 9-Zone with Richdel Valves: Only Zone 6 Runs After Heavy Rain

Rain Bird ESP-LX Running All Zones Simultaneously: Programming and Valve Fixes

Hardie HR-6100 Runs on Wrong Day: Check Program C or Replace

Hardie Controller Flashes, Won't Run – 15 Years Old, Replace

Rain Dial Valves: On vs Off Position and Controller Not Working

Plants

Toro TCM 212 Losing Time: Microprocessor Failure Means Replacement

Hunter X-Core to Orbit Iris Timer Swap: Direct Wire Compatibility

Rain Bird ESP‑8SI “PR OFF” Error – Power Supply Check

Controller Activates During Lightning Storm While in OFF Position

New Drip Zone Valve Stuck On: Debris from Installation

Sarracenia Leaf Removal During Repotting: Benefits and Exceptions

Yard Sprinkler Systems: Why Hiring a Pro Beats DIY Installation