Cutting Curves in Flagstone for a Front Walkway

Cutting Curves in Flagstone for a Front Walkway

Creating a winding flagstone walkway involves removing existing concrete and cutting stone to fit gentle curves.

Tools & Safety

• Wet saw with diamond blade – rent from tool supply.
• Always wear safety goggles, gloves, hearing protection.

Cutting Curves

Wet saws cut straight lines. For curves:

1. Mark curve on stone with chalk or crayon.
2. Make a series of straight relief cuts up to the line (like slicing a fan).
3. Nibble away waste with the saw blade.
4. Alternatively, use stone nippers or a hammer and chisel for a more natural, irregular edge.

Installation Tips

• Excavate 6–8 inches; compact gravel base.
• Use sand or stone dust setting bed.
• Sweep polymeric sand into joints for stability.

Practice on scrap pieces first. The organic look of hand-chiseled edges often suits flagstone better than perfect saw cuts.