Finding PVC Saddle Tees for Irrigation System Modifications

Finding PVC Saddle Tees for Irrigation System Modifications

Saddle tees (or saddle Ts) are specialized fittings used to tap into existing PVC pipe without cutting. They can be difficult to locate at big-box stores but are readily available through irrigation supply channels.

Where to Buy

• Irrigation supply houses: Companies like Ewing Irrigation, Horizon Distributors, and John Deere Landscapes (now SiteOne) cater to professionals and stock saddle fittings in various sizes.
• Manufacturers: King Innovation (formerly King Brothers) produces a wide range of saddle fittings for PVC pipe.
• Online retailers: Specialty plumbing and irrigation websites often carry them.

Specifying the Right Fitting

• Pipe size: 2-inch schedule 40 PVC
• Outlet size: Typically 1/2″, 3/4″, or 1″ FIPT (female iron pipe thread) or slip
• Pressure rating: Ensure the saddle is rated for your system pressure (typically 150–200 psi for schedule 40)

Installation Tips

1. Clean the pipe surface thoroughly.
2. Apply PVC primer and cement to both the saddle outlet and pipe (if solvent-weld type) or use the gasket/seal provided with mechanical saddles.
3. Tighten bolts evenly to avoid cracking the pipe.
4. Pressure test before backfilling.

If local suppliers cannot help, contact King Innovation directly or search for "PVC saddle tee 2 inch" from online industrial suppliers.