Meyers Pump Won't Stay Running: Foot Valve or Contactor

Pump Runs Only When Contactor Held Manually: Suction or Electrical Fault

Meyers pump with 2-gal bladder. Primes, runs only while holding contactors closed. Releases bladder water then stops.

Three Main Causes

1. Foot valve (check valve) at bottom of well line failed – Loses prime.
2. Suction line leak – Air enters, breaks prime.
3. Contactor (relay) worn out – Won't hold in.

Pro Diagnosis Needed

This is a well service job. They can test foot valve, line integrity, and contactor. DIY risks more damage.