Dog pulled wires apart on Rain Bird PC-106PS with two solenoids. Wires from controller: white, red, green, black. Need to know which connects where.
Assume: White = Common (C), Red = Zone 1, Green = Zone 2, Black = unused/spare
Common wire daisy-chains to ONE wire on EVERY solenoid. The other solenoid wire gets its dedicated zone wire. Polarity doesn't matter on AC solenoids.
Use gel-filled wire nuts or heat-shrink butt connectors. Standard wire nuts fail in valve boxes.
Rain Bird ESP Modular Rain Sensor Won’t Reset – Moisture Still Present
Rain Bird ESP-1 Troubleshooting: Need System History
Rain Bird RC-7A Hangs Between Stations: Advance Motor or Gear Wear
Rain Dial RD-900: Zones 1 & 2 Low Voltage — Check for Short
Rain Bird ESP 14-Year-Old Blowing Fuses—Controller vs. Field Isolation
Rain Bird ESP-6SI Stuck on Station 1: Programming or Electrical Fault?
Replacing a Discontinued Rain Bird RC-7Bi Clock Module After Lightning Damage
Richdel 446 Wiring Error Causes All Zones to Activate Simultaneously
Rain Bird ESP-6TM No Power – Transformer or Field Short
Rain Bird RC-1260Bi: Timer Motor Failure
Rain Bird ESP-6SI Controller: Zones Won't Activate After Repair
Troubleshooting a Rain Bird E-Class Controller: Voltage Checks and Next Steps
Troubleshooting a Vintage Rain Bird EFA/G Brass Valve That Won't Reopen
Copyright © www.100flowers.win Botanic Garden All Rights Reserved