Lost Lake Strainer? Finding Replacement Parts in Florida

Dropped Your Foot Valve/Strainer in the Lake? Here's How to Replace It

A homeowner in Davie, FL (near Fort Lauderdale) lost their 2" lake strainer during cleaning. The system now requires manual priming each start.

What You Need

• 2" PVC Spring Check Valve (prevents back-drainage).
• 2" Lake Strainer / Screen (keeps debris out of pump).
• Both available at John Deere Landscape branches across Florida.

Where to Buy

Visit johndeerelandscapes.com, enter your ZIP (33314, 33317, etc.), and find the nearest branch. They stock:

• PVC check valves (spring-loaded, 2")
• Strainer screens (various mesh sizes)
• PVC fittings, primer, cement

Installation Tips

1. Use PVC primer and cement on all joints. 2. Install check valve vertical, flow arrow up. 3. Strainer goes on the suction side before the check valve. 4. Secure assembly to a dock or weight so it can't be dropped again.

Cost Estimate

Check valve: ~$40–60. Strainer: ~$30–50. Far less than a $400 service call.