Question
Hi,
The control box for my Hunter XC was recently moved and now the control box appears to be working but none of the sprinklers come on.  It has 8 zones and none work, before the move the system worked perfectly.  If I manually turn the sprinklers on at the solenoid they work ok, but not with the controller.  It shows they are working but they aren't.  An electrician moved the box and rewired it accordingly.  Could this be the issue?  I've done a system check i.e. ran the diagnostic program, and it was ok.  Its all a tad frustrating.

Answer
Please submit a picture of the wiring. After you paid an electrician to move it did they test it to make sure it worked? Did you move it because you were remodeling if so can you trace the wire from the timer to the valves to make sure that the wire has not been compromised? You are having an electrical issue and most likely it is due to the wires not being properly installed into the timer or the wire wire running from the timer to the valves is cut somewhere.