Nelson Smart Zone 'Er2' Error: Reset Button or Front Panel Replacement

Nelson Panel Flashes "Er2"; Click Heard but No Sprinklers/Pump

Press the reset button inside the back of the control panel.
If "Er2" persists → front panel is faulty; replace it.
If reset clears it, the cause was a temporary short (bad solenoid or wire). Monitor for recurrence.

Irrigation: Rain Bird RC-7Bi Stuck on Zone 1: Advance Motor or Switch Failure; Troubleshooting a “Possessed” Zone Valve That Runs With Every Station; Nelson SmartZone EZ Runs First Two Zones Then Stops – Zone 3 Solenoid Bad; Controller Outputs 24V Constantly on One Zone: Workaround or Replace; Diagnosing a Shorted Solenoid on Zone 2 (Hunter SRC+ System); RC-7BI Controller Single Zone Operation: Stuck Valve Diagnosis; Nelson Smart Zone EZ: Low Pressure, Zones Not Activating; Richdel 446PR "FUSE 7 16" Error—Controller Replacement Time; K-Rain Valves All Open Simultaneously: Wiring and Valve Configuration Errors; JH 4000 Controller Blinking Display: Sign of Impending Failure

Garden Articles

Plants