A James Hardie Rain Dial controller (6, 9, or 12 station) runs irrigation even when function switch is set to OFF/STOP. The original irrigation store is closed.
The function switch contacts are worn, failing to break the circuit in OFF position. This is a mechanical failure in the front panel assembly.
If panel unavailable or case/transformer also suspect, full Rain Dial controller replacement is straightforward. Label wires before disconnecting.
Rain Jet RJ46 Runs in Rain Mode: Valve or Controller Fault
Replacing a Dead Nelson SmartZone EZ Controller – Compatibility and Recommendations
Testing Rain Bird ESP‑6 Wiring and Solenoids with a Multimeter
Hardie 9‑Station Controller Replacement: Irritrol Rain Dial
Hardie Irrigation System Runs Continuously: Valve vs Controller Diagnosis
Hardie RJC-FOUR Controller: Obsolete Model Replacement Options
Hardie RD-600 Display Frozen After Power Outage: Controller Failure
Hardie RD-1200 Battery Drain: Replace Panel, Not Whole Controller
Hardie Slim Line Controller Dim/Broken Display—Replacement Needed
Hardie Total Control TC-15B "Error - 1" After Freeze
Hardie Total Control "Short" Error – Controller or Solenoid #6
Hardie HR-6100 Zone No Water – Diaphragm Likely Faulty
Copyright © www.100flowers.win Botanic Garden All Rights Reserved