Error message with zone number appears during manual run.
Error number points to zone. Find valve with matching wire color, replace its solenoid.
Hunter SRC Plus Two Zones Not Working: Electrical Troubleshooting
Hunter SRC Plus Unreliable After 6 Years: Replace Controller
Hardie Total Control TC-15B "Error - 1" After Freeze
Hunter Controller Zone Running Too Long: Programming Error or Hardware Failure?
Hunter EC 'NO AC' Error After Siding Work: Transformer or Controller Fault?
Recurring Hunter XC Controller Failures: Wiring Short or Solenoid Issue?
Hunter XC Controller No Display After Power Outage: Reset and Power Checks
Hardie RD-600 Shows "7" and Freezes: Power Surge Reset Fix
Hunter Pro‑C Runs at Unscheduled Times – Clear Programs B and C
Hardie Total Control "Short" Error – Reset and Check Fuse
Hunter Control Won't Start Well Pump – Check Pump Start Relay Circuit
Troubleshooting Hunter Pro-C Module Failures After a Storm
Hunter ICC "NO AC" With Good Transformer Voltage: Board Failure
Copyright © www.100flowers.win Botanic Garden All Rights Reserved