Effortless Hypertufa Plant Containers: A Simple Weekend Project

Make rustic, stone-like planters with hypertufa using two or three nested cardboard boxes.

Process

1. Line large box with plastic.
2. Pour 3-inch hypertufa base.
3. Wrap smaller box in plastic, center it. Pack hypertufa around sides. Support inner box with sand or foam if needed. Use leftover mix for foam-cup feet.
4. Cover, cure several days.
5. Remove inner box, cure one more day. Remove outer box (tear wet, cut dry).
6. Wire-brush surfaces. Drill drain holes while damp if desired.

Performance

Hypertufa wicks moisture—plants stay hydrated 2–3 days per watering. In wet regions, add drainage. No sealant required.

More projects at the hypertufa blog.