1. Home
  2. Question and Answer
  3. Houseplants
  4. Garden Articles
  5. Most Popular Plants
  6. Plant Nutrition

Building a $200 Greenhouse from Recycled Fluorescent Tubes: A 1950s Innovation

Long before sustainability became a buzzword, resourceful gardeners were already recycling materials and growing plants in creative ways. One remarkable example comes from 1956, when a Tulsa resident named Mr. Milan constructed an orchid house for just $200—including benches—using spent fluorescent light tubes.

The "Spent Lighthouse" Concept

Milan's 8-by-20-foot greenhouse featured walls and ceilings made from 48-inch fluorescent tubes that had already served four years in service. These tubes had weathered Oklahoma's harsh hailstorms and winter temperatures as low as 10°F. He aptly nicknamed the structure his "spent lighthouse."

The idea originated from a similar structure Milan had seen in California. As far as records show, his Tulsa greenhouse was the first of its kind built in Mid-America. While California orchids required shade, Oklahoma's intense sun made filtered light even more critical. Meanwhile, Mrs. Milan specialized in ferns, which couldn't survive conventional greenhouse conditions.

Why Fluorescent Tubes Worked Better Than Glass

The spent tubes offered two key advantages over ordinary window glass: their frosted surfaces provided naturally filtered light, and their vacuum-sealed construction created excellent insulation. These properties solved both the light intensity and temperature control challenges simultaneously.

Surprising Plant Responses

Under California's open-door conditions, African violets refused to flower for the Milans because the plants despise drafts. Inside the tube greenhouse, however, African violets thrived "as wild as they do in their native Africa," flowering so prolifically they crowded out other plants and had to be given away.

The greenhouse survived the summer of 1956—the seventh hottest on record at that time—without any cooling apparatus. From July through September, temperatures consistently exceeded 100°F, yet daily water spraying kept plants viable.

Construction Details

The 20-by-8-by-9-foot structure used redwood, fluorescent tubes, and sponge rubber. A base of 4-by-4-inch redwood timbers bolted together rested on bricks for leveling. Side walls featured 2-by-3-inch redwood framing with vertical studs dividing the 20-foot length into ten panels. Tubes were placed vertically in each panel, secured with sponge rubber strips and wooden spacers for a tight fit. Wooden strips nailed to horizontal members prevented tubes from falling in or out.

Each panel included a removable screw-fastened section for tube replacement. Diagonal 16-gauge wires braced the sides against wind. One end used four panels; the other incorporated narrow panels and a door.

Innovative Roof Design

The roof consisted of six arches made from three 1-by-4s bent into shape, creating a one-foot rise at center. Spaced four feet apart, the arches maintained curvature via 16-gauge galvanized wire "bow strings." Tubes laid horizontally across the arches formed a corrugated roof, secured with 3/4-inch wooden strips and plumber's tape.

A 9-by-20-foot clear plastic sheet covered the roof tubes to prevent rain leakage, reduce winter heat loss, and protect plants like Schefflera amate. Ventilation came from small openings at each arch end plus the door in warm weather.

Thriving Plant Collection

The Milan greenhouse successfully grew numerous orchid tribes: Cattleya, Phalaenopsis, Phaius, Cypripedium, and Oncidium. Other flourishing plants included begonias, hoyas, wood rose, philodendron, anthurium, and a fern collection. During winter, two 15,000 BTU unit heaters maintained 60°F temperatures.

This 1950s experiment demonstrates how innovative recycling and understanding of material properties can create highly effective growing environments—lessons still relevant for today's sustainable gardening.

Copyright © www.100flowers.win Botanic Garden All Rights Reserved